Grundfos logo

APG Series

The APG Pumps are submersible pumps with a horizontal discharge port. They are specifically designed for the pressurised pumping of sewage and wastewater containing destructible solids. The pumps are equipped with a cutter system which cuts destructible solids into small pieces so that they can be led away through pipes of a relatively small diameter. The pumps are available with or without control box and level switch. Pumps without control box must be connected to a separate pump controller with motor starter.

Send An Enquiry
APG Series
  • Features
  • Applications
  • Curves
  • Tech Specs
  • Dimensions
  • Integrated cutting system (APG)
  • Dry or submerged installation
  • Installation on auto coupling
  • Sensors in windings

NOTE: Product information should be used as a guide only and should not be used for pump selection. For further information, please contact Malcolm Thompson Pumps on 1800 355 606.

The compact design makes these pumps suitable for both temporary and permanent installation. They are suitable for both free-standing installation and installation by means of an auto-coupling guide rail system. The APG Pumps are designed for pumping:

  • Sewage
  • Wastewater
  • Wastewater with high content of fibrous material

 APG.50.65.3 Value  
Technical:
Actual calculated flow: 7.08 l/s
Max flow: 8.78 l/s
Resulting head of the pump: 37.4 m
Head max: 52 m
Type of impeller: CUTTER SYSTEM
Curve tolerance: ISO 9906:1999 Annex A
Model: B
Materials:
Pump housing: Cast iron
EN-JL1040
ASTM 35 B
Impeller: Cast iron
EN-JL1040
ASTM 35 B
Installation:
Pump outlet: DN 50
Maximum installation depth: 10 m
Inst dry/wet: S
Installation: vertical
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 40 °C
Liquid temp: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s
Electrical data:
Power input – P1: 7.5 kW
P2: 6.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
Rated current: 13.4 A
Cos phi – power factor: 0,81
Rated speed: 2900 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Motor protec: CONTACT
Thermal protec: external
Length of cable: 10 m
Type of cable plug: NONE
Controls:
Control box: not included
Others:
Net weight: 104 kg
APG.50.92.3
Technical:
Actual calculated flow: 4.72 l/s
Max flow: 8.58 l/s
Resulting head of the pump: 56.6 m
Head max: 68 m
Type of impeller: CUTTER SYSTEM
Curve tolerance: ISO 9906:1999 Annex A
Model: B
Materials:
Pump housing: Cast iron
EN-JL1040
ASTM 35 B
Impeller: Cast iron
EN-JL1040
ASTM 35 B
Installation:
Pump outlet: DN 50
Maximum installation depth: 10 m
Inst dry/wet: S
Installation: vertical
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 40 °C
Liquid temp: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s
Electrical data:
Power input – P1: 11 kW
P2: 9.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
Rated current: 19.1 A
Cos phi – power factor: 0,81
Rated speed: 2900 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Motor protec: CONTACT
Thermal protec: external
Length of cable: 10 m
Type of cable plug: NONE
Controls:
Control box: not included
Others:
Net weight: 116 kg

 Pump Type    A    D    E    F    G    H    U    V    X    Y  
 APG.50.65.3(Ex)  642  193  415  210  297  147  810  182  562  729
 APG.50.92.3(Ex)  712  193  415  210  297  147  810  182  562  729

Our Partners